This article explains in detail how to set up a small home network so you can share your Internet connection between two computers running Windows system.
First, print a printer’s network setup page. You will need his information. Then log in to your router control panel. This is almost always done by opening a web browser and go to router’s default IP address 192.168.1.1. If a password window appears, you are in the right place. See the documentation for your router to the default password if you do not know them.
Turning on encryption is a two-step process. First you configure your router to use encryption using an encryption key of your choice. Then, you can configure your computer to use the encryption key. The actual process of configuring your router for encryption varies from router to router. Please consult the router’s manual.
A series of these numbers is classified as private IP. In general, this set of numbers range from 192.168.0.0 to 192.168.255.255. Each of these numbers is conserved and unique with respect to other IP addresses. The single word is used in the sense that these numbers are unique within the network to which they belong. To make this clear, consider an example from your college or office computer, which is assigned an IP 192.168.1.1 in the network and you will have the same IP address in your home network as well and it will not create a problem in conflict .
What if you have more than 2 GB or more of data to be transferred? Here we can use the local network. A LAN is a group of two or more computers that can share information and resources. You can have 1000 computer on your local network depending on the size of your organization as long as the computers are kept in one building or location. Here I will tell you how to build a local network for 5-10 computers. First of all we need to know the facilities that are necessary for the installation of a LAN.
Usually broadcast its SSID router. So if your computer searches for a network, you will see the SSID name of the router. Show it tells people that the router is turned off and in use. You do not want others to know that you have a wireless router in your home. So turn off the broadcast so that others may not be able to see your router is turned on. Preferably after disabling SSID broadcasting, change the name of your SSID. Remember the new name so you must enter the SSID name of your computer to connect.
Computer are located at totally different ends of your own home and you can not run an Ethernet cable between the router 2. You want to hyperlink to your community neighbors so you can share the Internet service, recordsdata, and media near the music and movies. The possibilities are unlimited in the case of networking routers together using wireless.
Search a page named “Wireless Security” (Or something like that) which allows you to specify your SSID. Enter your name in the network field.
You are now good to surf the Internet, check your favorite websites, print documents, send and get email, share multimedia files through a folder or engaging manifest in games with your buddies.
Open the Command Prompt window. Type “ping 192.168.1.1” (without quotes and as is). Check obtained and act accordingly answers. If you think something should be done with the router configuration, log on to its interface. Open your Internet browser, type 192.168.1.1 in the address and press the Enter key bar. It will ask for the username and password of the router. Enter the credentials and check and change the settings if necessary. Save the settings and exit all windows. Your wireless connection should work properly now. If you still can not get it to work, and then look for support options online for Netgear routers.